background image

 

- 4 -  
 

 
 
 

4. Calculations 

 

You need a good speed reference, such as a GPS, radar speed sign or another vehicle 
with accurate speedo. 
Read your indicated speed when the actual (reference) speed is e.g. 60 mph 
or 100 km/h. 

Repeat the measurement to make sure you get consistent results. Then use the following 
formula to get the calibration value you need: 

 

%

 

100

 

x

 

1

 

-

 

Indicated

Actual

 

value

 

n

Calibratio

 

SH

=

 

 
Example: 
If your indicated speed was 66 mph at 60.0 mph actual (reference), the 

calibration value would be:   -9.09% 

 -9.1% 

 

 
 
 

5. Warranty 

The SpeedoHealer is built to last: all leads are protected against reverse voltage, short 

circuits and high energy transients. Only high-quality components are built in, and the 
epoxy resin encasing provides extreme protection for the internal parts from shocks, 

vibrations and water. To ensure trouble-free operation, all units are extensively tested 
prior to shipment. 
Should you not be entirely satisfied for any reason, our dealers offer a 30-day 
moneyback guarantee 

(all parts must be returned in original condition for full refund)

Furthermore, the product is covered by our 2-year replacement warranty from the date 
of purchase 

(invoice copy required)

 

 

www.speedohealer.com 

Summary of Contents for SPEEDOHEALER v4

Page 1: ... 9999 9 in steps of 0 1 This means the signal can be adjusted from 1 1000 to x100 in increments of 0 001 This range is efficient even for the most radical conversions and suitable for all kinds of custom applications as well e g different engine gauge combination bike engine powered cars etc Dual Bank Memory Allows storing two independent calibration values and switching among them is possible by ...

Page 2: ...999 9 You need to enter all digits including the leading zeros e g enter 07 5 if you want to program 7 5 3 Press SEL to proceed to the first digit of the calibration value n next is shown and then the value of the first digit will blink Press SET repeatedly until the desired value is shown Repeat this step until all digits are entered 4 After the last digit has been entered press SEL to exit from ...

Page 3: ...ressed for one more sec until the value switches When Km h to MPH conversion is active the indicated speed and distance travelled will be converted but the displayed units of measure km h and km won t be changed It is possible to switch on off the Km h to MPH conversion only If you wish to use MPH to Km h conversion you have to program 60 9 1 609 multiplier on top of the calibration value you need...

Page 4: ...e 9 09 9 1 5 Warranty The SpeedoHealer is built to last all leads are protected against reverse voltage short circuits and high energy transients Only high quality components are built in and the epoxy resin encasing provides extreme protection for the internal parts from shocks vibrations and water To ensure trouble free operation all units are extensively tested prior to shipment Should you not ...

Reviews: