background image

P/N UM402LB REV20190501 

15 

WARRANTY 

10-Year Limited Warranty 

 

What does the Warranty Cover? 

This Health o meter

®

 Professional scale is warranted from date of purchase against defects of materials or in 

workmanship for a period of ten (10) years. If product fails to function properly, return the product, freight prepaid and 
properly packed to 

Pelstar, LLC (see “To Get Warranty Service”, below, for instructions). If the manufacturer 

determines that a defect of material or in workmanship exists, the customer’s sole remedy will be replacement of the 
scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is 
no longer available, replacement may be made with a similar product of equal or greater value. All replaced parts are 
covered only for the original warranty period. 

Who is Covered? 

The original purchaser of the product must have proof of purchase to receive warranty service. Please save your 
invoice or receipt.  Pelstar dealers or retail stores selling Pelstar products do not have the right to alter, or modify or 
any way change the terms and conditions of this warranty. 

What is Excluded? 

Your warranty does not cover normal wear of parts or damage resulting from any of the following:

 negligent 

use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, abuse 
including tampering, damage in transit, or unauthorized repair or alternations. Further, the warranty does not cover 
natural disasters, such as fire, flood, hurricanes and tornadoes. This warranty gives you specific legal rights, and you 
may also have other rights that vary from country to country, state to state, province to province or jurisdiction to 
jurisdiction. 

To get Warranty Service make sure you keep your sales receipt or document showing proof of purchase. 

Call 

(+1) 800-638-3722 or (+1) 708-377-0600 to receive a return authorization (RA) number, which must be included on 
the return label. Attach your proof of purchase to your defective product along with your name, address, daytime 
telephone number and description of the problem. Carefully package the product and send with shipping and 
insurance prepaid to:

 

Pelstar, LLC 
Attention R/A#_____________ 
Return Department 
9500 West 55

th

 Street  

McCook, IL 60525 
 

Typical product life is 10 years or 100,000 cycles but may vary significantly based on daily usage, treatment 
and other factors. 

 

 

                                                                   

                                                                                 

 

PELSTAR, LLC 

9500 West 55th St. McCook, IL 60525-7110  USA 

1-800-638-3722 or 1-708-377-0600 

PLEASE REGISTER YOUR SCALE FOR WARRANTY COVERAGE AT: 

 www.homscales.com 

 

Health o meter

®

 is a registered trademark of Sunbeam Products, Inc. used under license. 

Health o meter

®

 Professional products are manufactured, designed, and owned by Pelstar, LLC. 

We reserve the right to improve, enhance, or modify Health o meter

®

 Professional product features or specifications 

without notice. 

© Pelstar, LLC 2019 

 

 

QNET BV 
KANTSTRAAT 19 
NL-5076 NP HAAREN 
THE NETHERLANDS 

0459 

Summary of Contents for 402LB
















Reviews: