5
1 2 3 4
FRONT PANEL
1.
STANDBY key - Switches between Operational and Standby modes.
2.
Numerical LED display - Shows channel selected, Load status etc.
Power LED, green - Indicates power supply active.
Signal Lock LED, orange - No Light = No Signal = No Pictures and Sound.
3.
CH+ key. Use to turn channel upwards.
4.
CH- key. Use to turn channel downwards.
REAR PANEL
1.
ANT IN: Connect to your external aerial, essential for stable pictures.
2.
LOOP OUT: Antenna RF output, for another receiver or 75
Ω
terminator. Loop
Out becomes idle when receiver on STANDBY
3.
AUDIO OPT DIG: Audio Optical Digital output, 1 x Toslink.
4.
RS 232: for software upgrade, 1 x DB9.
5.
HDMI: Combined digital video and audio output.
6.
CVBS: composite video signal output, 1 x RCA.
7.
AUDIO L: signal outputs, 1 x RCA.
8.
AUDIO R: signal outputs, 1 x RCA.
9.
Component Video: Y/Pb/Pr outputs, 3 x RCA.
10.
Mains power connection : IEC C7 figure 8.
