12
Audio. c) Connect a 2 wire RCA lead to the Red and White AUDIO L&R
output connectors on the rear of the set top box. d) Connect the other end of
the cable to corresponding the audio input connectors on your television or
monitor. e) Digital Audio for an external decoder is available from the
Toslink Audio Optical Digital terminal.
Audio
c) Connect one end of each of 2 x RCA leads to the Red and White AUDIO
L&R output connectors on the rear of the set top box.
d) Connect the other end of the cable to corresponding colored input
connectors on your television monitor.
e) You also can link Digital Audio from the COAXIAL or OPTICAL
SPDIF terminal to its corresponding connector on a TV set for a perfect
audio.
2.3. Connect
the antenna…
to the “ANT IN” connection on the back of your receiver.
2.4. Connect
mains power…
to the back of your receiver using the IEC C7 figure 8 power lead supplied.
You are now ready for “GETTING STARTED.
3. BASIC SET UP- HDMI
Uses the HDMI connector on the back of the receiver to provide a complete
digital video and audio connection in one neat cable. A HDMI cable of
length to suit your purpose is required. All video outputs are active.
3.1. Prepare your equipment
Ensure the power leads to both display and receiver are unplugged whilst
making your AV connections. Your Monitor must have a HDMI input.
Check your Monitor has a HDMI input.
3.
2. Connect the antenna…
to the “ANT IN”
socket on the rear of your receiver.
3.
3. Connect mains power…
to the back of your receiver using the IEC C7 figure 8 power lead supplied.
