8
PREPARING THE REMOTE CONTROL FOR USE
REMOTE CONTROL OPERATING DISTANCE & ANGLE
USEFUL TIPS
1.
For prolonged receiver life, intervals of continuous switching action
should be kept to less than one minute.
2.
Should the receiver stop responding to RCU commands or freeze up,
disconnect the batteries and or power for 10 seconds or so and restart.
3.
Daylight and some electric light can compromise the distance over
which an RCU is effective. You can solve by re-adjusting receiver
position and room lighting as necessary.
Fresh batteries must be loaded for your Remote Control Unit to operate
reliably.
1.
Open the battery compartment lid on the back of the RCU.
2.
Insert the batteries, negative terminals first. Take care that battery
polarity markings correspond with those of the Remote Control.
3.
Close the battery compartment lid, checking that it locks in place.
4.
Your RCU should now be ready for use.
With an uninterrupted view of your receivers’
front panel IR window, point the RCU towards
your receiver and press any key.
1.
Distance:
the remote control should work up to
7 meters from the front of your receiver…
2.
Angle:
and about + or - 30 degrees from directly
facing the receiver (see drawing).
