healing HHH640, Operating Manual

Page: 27 / 40

26
RECORDING FUNCTIONS
Connect a USB memory stick or hard disk drive storage device to the host
USB-2 connector on the receiver.
Your receiver has been tested with a wide range of USB Storage Devices of
sizes of up to 2TB including those USB powered, however it may not be
compatible with every USB storage device available. Your receiver is
special in that it reads / writes in either FAT32 or NTFS format, resulting in
broader compatibility with existing files and drive formats.
Note:
N
ew
T
echnology
F
ile
S
ystem volumes use advanced data structures
that improve disk performance, reliability, space utilization and manage disk
errors more readily.
Formatting your USB Storage Device
Formatting a storage device configures it with a file system that enables
your receiver to store information on it, clearing all available space for
reliable record and replay. This receiver even formats storage devices to
their FAT32 or NTFS default, resulting in better device compatibility.
Formatting a storage device with recordings or files on it deletes existing
files and recordings, permanently!
To format a storage device, action the following:-
. Press the USB key on the remote control and MY RECORDER page will
be displayed.
. Press the NAVI key and the 7 Navi menu symbols will display at bottom
left of screen.
. Press the right arrow key on the remote control until Device is selected.
. Press the OK key and the Format menu displays showing storage device,
Free Used and Total capacity.
. Press the down arrow key on the remote control until Format is selected.
. Press the OK key to start. Display asks: Formatting this partition? Press
the OK key to start Formatting.
. The larger the drive, the more seconds will be required. Success will flash
on screen momentarily. Confirmation display shows disk Free, Used and
Total space. Successful Formatting renders the Used space as 0MB.