headway EDB-2 Instruction Manual Download Page 7 | Manualshive

Page: 7 / 34

headway EDB-2 Instruction Manual Download Page 7

7

1 SAFETY PRECAUTIONS & OPERATION

1.1 Important Safeguards to your life and gear to note before using
your EDB-2

Please read all warnings on Headway Sheer Acoustic EDB-2

Equaliser Direct Blend unit very carefully:

IMPORTANT: Make sure that you power only by Headway's supplied
Power Supply Unit: Headway EDB PSU or via 2 x PP3 (9v) batteries
as included with this unit. (Suitable for EDB-1 & EDM-1)

Mains Plug Connector Types available for EDB-2:

UK = United Kingdom/Eire/Singapore (e.g. EDB PSU UK)
EU = Europe (Continental Mainland)

NA = North America/S. America/Japan
AUS = Australasia/S. Africa

1.1.1 EARTH PROTECTION & GROUNDING

To prevent electric shock ensure that any input/output cables from
EDB-2 are connected to amplification or signal processing devices
(e.g. mixers, amplifiers, effects units) so that where Mains powered
devices are used, there is a continuous, unbroken chain of Mains
earth connection and where the mains supply at the venue offers a
viable Earth or Ground connection.
DO NOT disconnect the ground/earth wire on any connected mains
powered devices.

1.1.2 MAINS PROTECTION

Always take care to protect your own life and those of others, along
with your gear by using RCD Circuit Breakers and AC Mains Surge
Protectors at each source of the mains power. Circuit breakers should
be tested prior to use.

We recommend that you also use Mains Noise Filters.

Switch off Power Supply Unit and other connected mains powered
devices and unplug when EDB-2 unit is not in use.

«
...
5
6
7
8
9
...
»

Summary of Contents for EDB-2



































Reviews:

No comments