HEADRUSH Looperboard, Quick Start Manual

Page: 9 / 96

9
To record a track , press its •Rec / Play / Dub footswitch.
Important : Before recording anything, set the input volume level by turning the Input ( 1 – 4 ) knob for
each input you want to use.
To finish recording and start playback of a track , press its •Rec / Play / Dub footswitch again.
To overdub on a track that is currently playing , press the •Rec / Play / Dub footswitch again.
Tip : Use the Global Settings page to set HeadRush Looperboard to overdub immediately after
recording a track (instead of just playing it).
To stop a track at any point , press its •Stop / –Undo footswitch.
To restart a track's playback, press its •Stop / –Undo footswitch again.
To restart a track and immediately start overdubbing, press its •Rec / Play / Dub footswitch.
Tip : Use the Global Settings page to set HeadRush Looperboard to restart a track’s playback without
overdubbing when pressing the •Rec / Play / Dub footswitch.
To stop all tracks at any point , press the Start / Stop All footswitch when one or more tracks are
playing.
To start playback of all tracks simultaneously , press the Start / Stop All footswitch when all tracks
are stopped.
To undo everything you have recorded since you last pressed a •Rec / Play / Dub footswitch , press
and hold the •Stop / –Undo footswitch for that track for approximately 1.5 seconds .
To re-add everything you just undid , press and hold the •Stop / –Undo footswitch for that track for
approximately 1.5 seconds again.
To peel the most recent layer of a track, hold the •Rec / Play / Dub footswitch for approximately 1.5
seconds .
Important: If a track only has 1 layer, performing the undo function will clear the track, and the layer
cannot be restored.
Tip: Use the Global Settings page to customize the hold functions for the •Stop / –Undo and
•Rec / Play / Dub footswitches.