3
Features
Top Panel
1.
Touchscreen
: This full-color multi-touch display shows information relevant to the HeadRush
Looperboard’s current operation. Touch the display (and use the hardware controls) to control the
interface. See
Operation
>
Overview
to learn how it works.
2.
Encoder
: Turn this encoder to scroll through the available menu options or adjust the parameter
values of the selected field in the display. Push the encoder to confirm your selection.
3.
Input Gain
: Turn these knobs to adjust the independent gain level of each
input
.
4.
Footswitches
: Use these footswitches to perform different functions. The eight right-most
footswitches correspond to the four tracks of a loop. See the
Operation
chapter to learn how to
use them.
5.
Footswitch Indicators
: These lights indicate the status of different functions (performed by the
footswitch below each one). See the
Operation
chapter to learn about them.
6.
Main
: Turn this knob to adjust the volume level of the
outputs
.
7.
Phones
: Turn this knob to adjust the volume level of the
Phones output
.
8.
Aux
: Turn this knob to adjust the volume level of the
Aux input
.
Important
:
The audio signal from the
Aux input
is routed directly to the
outputs and cannot be
used for recording directly to a looper track
. It is also unaffected by the Main volume or phones
volume knobs.
Summary of Contents for Looperboard
Page 92: ...92 ...
