background image

TM 55-1945-205-24-3-3

0001 00 1

0001 00

UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

WARPING TUG
MARINE GEAR

GENERAL INFORMATION

SCOPE

This manual contains descriptions and maintenance instructions for Unit, Direct Support and General Support
maintenance levels for the Warping Tug (WT) marine gear, model number DD-15111V.

Type of Manual: Unit, Direct Support and General Support Maintenance Manual.

MAINTENANCE FORMS, RECORDS AND REPORTS

Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA PAM
738-750, Functional Users Manual for The Army Maintenance Management System (TAMMS); and AR 700-138,
Army Logistics Readiness and Sustainability.

REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)

If any component in your system needs improvement, let us know. Send us an EIR. You, the user, are the only one
who can tell us what you don't like about your equipment. Let us know why you don't like the design or performance.
Put it on an SF 368 Product Quality Deficiency Report. Mail it to the address specified in DA PAM 738-750, or as
specified by the contracting activity. We will send you a reply.

CORROSION PREVENTION AND CONTROL (CPC)

CPC of Army materiel is a continuing concern. It is important that any corrosion problems with this item be reported
so that the problem can be corrected and improvements can be made to prevent the problem in future items.

While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials, such
as rubber and plastic. Unusual cracking, softening, swelling or breaking of the materials may be a corrosion problem.
If a corrosion problem is identified, it can be reported using an SF 368, Product Quality Deficiency Report. Use of
key words such as “corrosion”, “rust”, “deterioration” or “cracking”, will ensure that the information is identified as a
CPC problem. The form should be submitted to the address specified in DA PAM 738-750, Functional Users Manual
for The Army Maintenance Management System (TAMMS).

OZONE DEPLETING SUBSTANCES (ODS)

The continued use of ODS has been prohibited by Executive Order 12856 of 3 August 1993.

DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE

The procedures for destruction of Army materiel to prevent enemy use are contained in TM 750-244-6.

PREPARATION FOR STORAGE AND SHIPMENT REFERENCE

Reference WP 0034 00 for preparing marine gear for storage or shipment.

Summary of Contents for DD-5111V














Reviews: