10.0 INSPECTION AND MAINTENANCE
10.1 Annual Recertification
DO NOT OPERATE AFTER THE DATE SHOWN ON THE CERTIFI-
CATION LABEL
Operation of a QuickFlight Free Fall Device without a current Certification
Label visible is strictly forbidden. Severe bodily injury or death may occur.
The QuickFlight Free Fall Device requires an annual service and recertification
inspection to be carried out by an authorized Head Rush Technologies service
agent.
The Certification expiration date is shown on the Certification Label located
on the side of the front casing. Dismount the Free Fall Device and return to the
Manufacturer at the address shown at the back of this Manual or to an Autho-
rized Service Center prior to the expiration date.
10024-02
SERIAL NUMBER:
MANUFACTURE DATE:
RECERTIFICATION DATE:
NEXT RECERT REQUIRED:
BY:
Do not use the Free Fall Device after date shown here.
ALL QUICKFLIGHT FREE FALL DEVICES MUST BE INSPECTED AND MAINTAINED
IN ACCORDANCE WITH THIS MANUAL. FAILURE TO PERFORM SCHEDULED
MAINTENANCE AND INSPECTIONS ON THE QUICKFLIGHT FREE FALL DEVICE
MAY RESULT IN SERIOUS INJURY OR DEATH. DO NOT ATTEMPT TO CARRY OUT
ANY MAINTENANCE, REPAIR, OR SERVICE ACTIONS NOT DETAILED IN THE USER
MANUAL. ANY UNAUTHORIZED MAINTENANCE, REPAIR, OR MODIFICATIONS TO
THE QUICKFLIGHT FREE FALL DEVICE WILL COMPROMISE SAFETY, RENDER THE
DEVICE NOT FIT FOR USE, AND VOID THE WARRANTY.
10.2 Scheduled Maintenance
The following inspection and service actions must be carried out by the oper-
ator or operator-trained staff. All personnel performing these actions must be
trained in the correct procedures and deemed competent to do so.
33
headrushtech.com | +1-720-565-6885
