HE-VA Tip-Roller XL, Operating Instructions Manual

Page: 13 / 48

GB Tip-Roller XL 12,3 – 15,3 m 26-03-2019
12
Back to the table of contents
Tighten up the bolts regularly. If this is not performed, our
warranty obligations will no longer apply.
Maximum torque in Nm. w/lubricated thread
Metric thread Quality 8.8 Quality 10.9 Quality 12.9
M10x1,5 47 65 79
M12x1,75 81 114 136
M14x2,0 128 181 217
M16x2,0 197 277 333
M18x2,5 275 386 463
M20x2,5 385 541 649
M22x2,5 518 728 874
M24x3,0 665 935 1120
Hub bolts M18x1,5 fine thread 433 Nm
Hub bolts M22x1,5 fine thread 803 Nm
9. Maintenance

After 10 hours of operation, tightening of wheels, bearings and stop rings must be done.

Hoses, fittings and cylinders must be checked for any leaks and retightened.

When the season is done the roller must be cleaned, lubricated and a thin layer of oil sprayed
on all painted parts.

Glossy piston rods must be protected by grease.
Lubrication
At every 10 hours operation: - every roller sections suspension
At every 30 hours operation: - wings bushings hinged to wheel frame
- bearings
- cylinders