2.1.2.
Connect multiple Processors as daisy chain
2.1.2.1.
Set Up unique IP address for each processor
Since the default IP address of each processor is the same, users need to change the IP addresses of these
devices to avoid IP conflict.
1)
Users need to connect the one by one using default
IP address:
192.168.1.25
to set up the connection between
device and control PC.
2)
Make sure the device has been connected and then
right click the
Device Name
and then choose
Change
Device IP Address
to open the
‘
Change Device IP Address
’
dialog window.
3) Please give a unique IP address for each device in the same system.
e.g.
Device 1
192.168.1.25
Device 3
192.168.1.27
Device 2
192.168.1.26
Device 4
192.168.1.28
2.1.2.2.
Daisy chain units with CAT cables
Daisy chain all the units via dual RJ45 ports and connect to the control PC for command and control.
