2.4.
Tool Bar
2.4.1.
Layout
pre-set layouts saved on device
Users are able to save up to 4 pre-set layouts here
and the layouts can be loaded by the
management software or 3rd party controller via
telnet.
Right click onto each layout to
Save
new layout,
Call
,
Modify
or
Delete
existing layouts
2.4.2.
F
Firmware update
Press this button to open firmware update dialog window
Select the firmware file (.zip file)
Make sure the IP address is the same address as the unit which needs to be updated
Please update .bin file first and then .bit file
2.4.3.
V
Version of firmware of devices
It shows the firmware version of all the processors which are connected to the software.
2.4.4.
H
Home
Centre the layout to the grid area.
2.4.5.
M
Show Measurements
Show the length and width of the video wall layout
2.4.6.
D
Snap to Display
When move the display, it will snap to the next display.
2.4.7.
G
Snap to Grid
When move the display, it will snap to the next grid.
