Upconverter / Multiplexer Connection Diagram
Although the Satellite Selector may have input
ports designating particular LNBs as a guide,
any of the four input ports can be connected to
single or multiple dish outputs in order to
receive the desired satellite signals.
Care must be taken, however, to ensure that
the desired satellite signal connected to an
input port of the Satellite Selector is also
connected to the corresponding output port of
the Satellite Selector as shown in the
Connection Diagram. Route the corresponding
satellite signals from the output ports of the
Satellite Selector to the labeled input
connections of the Upconverter / Multiplexer.
Connect the external power supply to the
Satellite Selector “18VDC IN” jack.