Multi-Switch Connection Diagram
Although the Satellite Selector may have input
ports designating particular LNBs as a guide,
any of the four input ports can be connected to
single or multiple dish outputs in order to
receive the desired satellite signals.
Care must be taken, however, to ensure that
the desired satellite signal connected to an
input port of the Satellite Selector is also
connected to the corresponding output port of
the Satellite Selector as shown in the
Connection Diagram. Each output port
connection can then be routed to the
corresponding multi-switch input connection
for that satellite signal.
Connect the external power supply to the
Satellite Selector “18VDC IN” jack.