General Instructions
Caution:
Ensure all cables and connectors have no short circuits. Make all cable connections
before energizing the power supply connection or damage to the unit could occur.
1.
Use High Definition RG-6 coaxial cable for all connections.
2.
Termination of the Satellite Selector’s input and output ports is not required on unused
channels.
3.
Each of the four Satellite Selector channels has a 20-turn potentiometer for precise gain
control. Adjusting the tuning screw clockwise will increase the gain, counter-clockwise
will reduce the gain. The gain adjustment will change more slowly at the lower end.
The four potentiometers have no stop on either end as this is a built-in safety feature to
prevent them from breaking.
4.
Proper output signal should be checked with a meter to prevent overdriving any of the
system’s four channels.
5.
for the latest instruction manual updates. This is
HDSSAG20DN Rev. 1.2.