4
•
Click, press and hold – turns on your flashlight to preset A. If
Pseudo Momentary is enabled, turns off when button is released.
•
Quad-click – toggles the Locator Flash on and off.
From On:
the following commands are available when your flashlight
is turned on:
•
Click – turns off your flashlight.
•
Double-click – toggles between preset B and preset C or returns
you to the last preset B or C used.
•
Triple-click – selects preset D.
•
Click, press-hold-release – selects preset A.
•
Press and hold – momentarily selects preset A. Returns to the
previous preset when the button is released.
Please refer to the model-specific specifications for the default
settings of your model’s presets and various features.
Please refer to
Customizing Your Flashlight
in section 9 for detailed
instructions on customizing your flashlight.
Note:
your flashlight uses Burst whenever you select the Maximum
brightness setting. The output is reduced by one brightness level – to
the one-hour output level – 40 seconds after the button is released to
maximize battery runtimes with minimal visual impact. Maximum
output is always used for as long as the button is held down. Burst
may be disabled in the Option Menu.
3. Low Battery Indication
Your flashlight will turn off momentarily and then back on one level
below the previous brightness level when the battery is unable to
supply enough power to run the current brightness level. This process
is repeated as needed as the battery’s power is depleted.
Your flashlight will double-blink once every two minutes to remind you
that the battery needs to be changed when the battery is no longer
capable of maintaining a 50 lumen output level and you are asking for
an output lever higher than the battery can maintain.
