14
click the button at any time during the sequence to return your
flashlight to the original brightness level and to reset the Automatic
Turn Off timer for another 10 minutes.
Option Menu Item #3
Locator Flash – <dim flash>
The Locator Flash feature allows your flashlight to emit a short flash of
dim light every three seconds when turned off. The periodic short
flash makes it easier to find your flashlight in the dark. Enabling the
Locator Flash turns on the Locator Flash following a reset. Disabling
the Locator Flash turns off the Locator Flash following a reset.
The Locator Flash may be toggled on and off using a quad-click when
your flashlight is turned off.
Option Menu Item #4
Pseudo Momentary – <long flash, short flash>
The Pseudo Momentary feature allows your flashlight to differentiate
between a click and a press and hold when your flashlight is turned
off. A press and hold from off will act in a momentary fashion when
Pseudo Momentary is enabled – i.e., turning off your flashlight when
the button is released. A press and hold from off acts like a click –
i.e., your flashlight remains on – when the button is released when
Pseudo Momentary is disabled.
Option Menu Item #5
Burst – <brighter-dimmer>
The Burst feature allows you to control the behavior of the maximum
level to conserve power and extend runtimes. Your flashlight will drop
by one level 40 seconds after the button has been released when
Burst is enabled. Maximum always stays at full power for as long as
the button is held down.
Note
: the runtime on the maximum level will be reduced to roughly 30
minutes when Burst is disabled. You will also notice that your
flashlight becomes quite warm on the maximum setting and may
automatically reduce power due to thermal limiting. This is normal.
