12
preceded by the last. When you get to the minimum or maximum
level, the displayed level will start with a double-blink.
•
Press and hold the button to select the current brightness level.
Your flashlight will display a dim-to-bright sequence to indicate you
are setting the brightness level. Release the button after your
flashlight turns off and your flashlight will return to the selected
preset with the newly selected brightness level.
•
Note:
your flashlight will exit the Brightness Menu with 5 rapid
flashes without changing the preset if an error is detected.
Possible errors include entering an unknown command, not
entering a command for 10 seconds and not holding the button
down until your flashlight turns off when selecting a brightness
level.
•
Note:
your flashlight will exit the Brightness Menu with 10 very
rapid flashes if there is insufficient power to memorize the setting.
14. Customizing Optional Features
Your flashlight offers the following features through the Option Menu:
1.
Turn On Preset – indicated by <long flash>
2.
Automatic Turn Off – indicated by <bright-to-dim ramp>
3.
Locator Flash – indicated by <dim flash>
4.
Pseudo Momentary – indicated by <long flash, short flash>
5.
Burst – indicated by <brighter-dimmer>
6.
Customization – indicated by <dim-to-bright ramp>
Follow these steps to enable or disable an optional feature from the
Option Menu:
•
See
Enabling Customization
in section 11 to enable customization.
•
Turn on your flashlight.
•
Triple-click, press-hold-release. Your flashlight will display the
indication for the first menu item (Turn On Preset – <long flash>).
•
Click to move to the next menu item. Double-click to reverse
direction and move to the previous menu item. The menu is
circular – the last item is followed by the first and the first is
preceded by the last.
