User Manual
HDL-MCIP-RF.10
Mesh Gateway – User Manual
2
1.3 Device Description
○
a
. Programming Button:
Long press the ‘PROG’ button
10s, then its IP and IP MAC will
be reset to the factory settings.
○
b
. Antenna: transmit and receive
wireless signals
○
c
. RJ45: Ethernet port RJ45
○
d .
DC24V: Power Supply, no
need to use it if connected the HDL
Bus interface (the DC power is
provided from it)
HDL Buspro interface
○
f
.MODE LED: RED LED flashing
quickly under wireless setup mode;
GREEN LED flashing when network
jams.
○
g
. T/R LED: BLUE LED flashing
when transmitting or receiving the
wireless signal.
