HDBaseT SSH70, User Manual

Page: 9 / 16

V2.1 9
Output HDCP Command
The following commands are used to select the HDMI Output HDCP modes:
Commands Details
SET TX HDCP-OPTION w

(default: Follow input)
w is one of following:
FORCE-1.4
FORCE-2.2
FORCE-OFF (cascade mode)
FOLLOW-INPUT (default)
GET TX HDCP-OPTION
 Get the output current HDCP mode
EDID Commands
Any of the following pre-defined EDID settings can be selected as the active EDID when the
front EDID switch on the SSH70-T is set to the PRE position. The selection for PRE is done using
the RS232 command given in the following table:
 4K60-2.0 (default)

4K60-5.1
 4K60-7.1
 4K30-2.0
 4K30-5.1
 4K30-7.1

1080P60-2.0
 1080P60-5.1
 1080P60-7.1

1080P60-3D-7.1
 1080P60-DVI
 1920x1200
 1680x1050
 1600x1200

1440x900
 1400x1050
 1360x768

1280x1024
 1024x768P60
 720P60-2.0
 MANUAL
 PASS
Commands Details
SET TX PREDEFINE-EDID w

(default: 4K60-2.0)
w is one of the 22 EDID options as given above.
See below for use of the MANUAL and PASS options.
GET TX PREDEFINE-EDID

Get the current EDID setting
SET TX COPY-DISP-EDID

Copy Display EDID to the MANUAL EDID memory.
When a specific EDID is required, it is recommended to use SSH70-PCTools (select SSH70
PCTool from list of tools menu) - load and save the EDID file and then select the MANUAL EDID
option by sending the SET TX PREDEFINED-EDID MANUAL

command to enable it.
To use the display EDID directly, set the switch on the transmitter to the Pass position, or send
the SET TX PREDEFINED-EDID PASS

command.
4K Down-Scaling
Compatibility with 1080p display units is assured by down-scaling any 4K (24/25/30/50/60Hz)
signal to 1080p. All 1080p or less signals are simply passed through.
For 4K display requirements, 4K60 4:4:4 (or 4K50 4:4:4) input signals can be down-scaled to
4K50/60 4:2:0, ensuring the 10.2Gbps maximum output bandwidth is not exceeded (Max.
40m). All lower bandwidth signals such as 4K30 4:4:4, 1080p are just passed through.
There are three options available:
 1080p: Down-Scale any 4K signal to 1080p

4K60-420: Convert 4K50/60 4:4:4 to 4K50/60 4:2:0 - (colour space conversion)

Auto:
cat5e/6/6a cable and the display capabilities are analysed for optimal resolution
/ colour space (4K 4:2:0 or 1080p) for 4K50/60 4:4:4 input.