background image

Safety and Notice

The 

HDMI-C5S4IR  HDMI  Extender  over  Single  Cat.X  with  Bi-directional  IR

 has been tested 

for conformance to safety regulations and requirements, and has been certified for international use. 
However, like all electronic equipments, the 

HDMI-C5S4IR

 should be used with care. Please read and 

follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage 
to the unit.

  Follow all instructions and warnings marked on this unit.

  Do not attempt to service this unit yourself, except where explained in this manual.

  Provide proper ventilation and air circulation and do not use near water.

  Keep objects that might damage the device and assure that the placement of this unit is on a stable 

surface.

  Use only the power adapter and power cords and connection cables designed for this unit.

  Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before 

cleaning.

Table Of Contents

  INTRODUCTION  ..............................................................................  p.1
  PANEL DESCRIPTIONS  .....................................................................  p.3
  IR PASS-THROUGH  ..........................................................................  p.5
  HARDWARE INSTALLATION  .............................................................  p.6
  EDID LEARNING  ..............................................................................  p.6
  PIN DEFINITION  ..............................................................................  p.7
  NOTICE  ..........................................................................................  p.8

Summary of Contents for HDMI-C5S4IR











Reviews: