XTND 2K (40m) Extender Manual
4
TRANSMITTER AND RECEIVER (x1)
1. HDMI OUT: Connect a local display or an AVR
to this port using appropriate HDMI cabling
2. Lock LED: This blue LED illuminates when the
device is connected to a receiver
3. Power LED: This blue LED illuminates when the
device is connected to its power supply
4. Digital Out: Allows ARC extraction of display
audio via optical cable
5. Arc Switch:
a. ARC OFF - Display audio will come from
the display’s internal speakers.
b. ARC ON - Display audio signal is sent down-
stream via the attached HDMI cable to the
XTND 2K (40) receiver
6. DC input: Plug the 5V / 1A DC power supply
into the unit
7. IR (IN): Plug the supplied IR RX into this port
8. IR (OUT): Plug the supplied IR TX into this port
9. CAT 5e/6 input: Connect the CAT 5e/6 cabling run
from the transmitter to this port
10. HDMI OUT: Connect a local display or an AVR to this
port using appropriate HDMI cabling
11. Power LED: This blue LED illuminates when the de-
vice is connected to its power supply
12. Lock LED: This blue LED illuminates when the device
is connected to a receiver
13. HDMI source input: Connect HDMI source e.g. Blu-
Ray player, with HDMI cable
14. DC input: Plug the 5V / 1A DC power supply into the
unit
15. IR (IN): Plug the supplied IR RX into this port
16. IR (OUT): Plug the supplied IR TX into this port
17. CAT 5e/6 output: Connect the CAT 5e/6 cabling run
from the receiver to this port.
7
8
9
10
11 12
13
14
15
16
17
1
2 3
4
5
6
IR (IN)
IR (OUT)
CAT
CAT
ON OFF
OUT
IR (IN)
IR (OUT)
RX
TX
