HDanywhere MHUB, Product Manual, Page: 21 / 30

21
... From uControl, proceed to configure MHUB-OS (Part 2)
1 . EULA & Privacy Policy
End User License Agreements and Privacy Policy statements. You can not proceed with setup if these are not
agreed to first.
2 . Name your MHUB
Provide a unique name for your MHUB so that you can identify it easily. In stack mode all detected MHUB
devices will appear here.
3a. Define connections between MHUB systems
If your MHUB(s) are being setup in stacked mode then this is where you will define what outputs from your
Master MHUB system are being routed to inputs on your Slave MHUB system(s).
3b. Split inputs
If you are using an audio splitter to split one or more audio sources to multiple MHUB systems then this is where
this relationship is defined.
4 . Name your source devices
Give each one of your source devices a unique name (eg “Sonos”, “CD Player”) so that you can identify and
switch to easily. If you are setting your MHUB up in stack mode then any inputs assigned in steps 3a & 3b will
become locked and unavailable to edit as their input is dynamic depending on the output of the master device.
5 . Create zones
A zone is a room or location in your property where outputs from MHUB terminate in (eg “Kitchen”, “Living
Room”, “Bar”).
6 . Assign outputs to zones
A zone can contain up to 4 outputs in total. However, zones are limited to supporting only one video enabled
MHUB output.
7 . Confirm zones An opportunity to review your changes
8 . Connect MHUB to HDA Cloud
Register MHUB on HDA Cloud to access online services, to extend your warranty and to grant permission for
remote monitoring and management to take place if your MHUB has been installed by a HDA Pro. The email
address must belong to the owner of the MHUB device.
9 . Complete setup A final step before returning back to the main uControl interface.