HCO ScoutGuard SG580M
2 Cautions
Page 5
2
Cautions
★
The working voltage of the camera is 6V. The camera is supplied by four or eight
AA batteries.
★
Please install batteries according to shown polarity.
★
Please unlock the write-protect before inserting the SD-card.
★
Please insert the SD-card when the power switch is at
OFF
position before testing
the camera. The camera has no internal memory for saving images or videos. If no
SD-card is inserted, the camera will shut down automatically after a continuous
indication sound.
★
Please do not insert or take out the SD-card when the power switch is at
ON
position.
★
It is recommended to format the SD-card by the camera when used at the first
time.
★
The camera will be in USB mode when connected to a USB port of a computer. In
this case, the SD-card functions as a removable disk.
★
In the
TEST
mode, the camera will shut down automatically after 3 minutes if no
operation is done. Please turn on the power again if you want to continue to work
with the control.
★
Please ensure sufficient power when having firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly. If any fault occurs after improper
upgrading process, the camera may stop function properly.
★
As communication networks reasons we can’t guarantee 100% success by sending
and receiving MMS.
!
