User's Guide
Connections
Modem Connection
The telephone wire used to connect the Notebook PC's internal modem should
have either two or four wires (only two wires (telephone line#1) is used by the
modem) and should have an RJ -11 connector on both ends. Connect one end
to the modem port and the other end to an analog telephone wall socket (the
ones found in residential buildings). Once the driver is setup, the modem is
ready to use.
Note:
1.When you are connected to an online service, do not place the Notebook PC in suspend (or sleep mode)or else you
will disconnect the modem connections.
2.The built-in modem cannot be installed later as an upgrade. After purchase, modem and/or network can be
installed as express card.
Warning :
Only use analog telephone outlets. The built-in modem does not support the voltage used in digital phone systems.
Do not connect the RJ -11 to digital phone systems found in many commercial buildings or else damage will occur!
Caution :
For electrical safety concerns, only use telephone cables rated 26AWG or higher.
Using the Notebook PC
4-10
Summary of Contents for ME 44 Aviator NB
Page 1: ...Notebook PC User s Guide REV2 0 ...
Page 2: ......
