HCC Technology POS80B Technical Manual Download Page 49 | Manualshive

Page: 49 / 71

HCC Technology POS80B Technical Manual Download Page 49

Thermal Printer Technical Manual

49

cannot underline the space set by HT and 90° clockwise-rotated characters.
After the underline mode for Chinese characters is turned off by setting n to 0, underline printing
is no longer performed, but the previously specified underline thickness is not changed. The
default underline thickness is 1 dot.
The specified line thickness does not change even when the character size changes.
It is possible to turn underline mode on or off using FS !, and the last received command is
effective.

[Default]

n = 0

[Reference]

FS !

FS . Cancel Chinese character mode

[Name]

Cancel Chinese character mode

[Format]

ASCII

FS

.

Hex

1C

2E

Decimal

28

46

[Description]

Cancel Chinese character mode.

[Notes]

When the Chinese character mode is not selected, all character codes are processed one byte at a
time as ASCII code.
Chinese character mode is selected when the power is turned on.

[Reference]

FS &, FS C

FS 2 c1 c2 d1...dk Define user-defined Chinese characters

[Name]

Define user-defined Chinese characters

[Format]

ASCII

FS

2

c1 c2 d1...dk

Hex

1C

32

c1 c2 d1...dk

Decimal

28

50

c1 c2 d1...dk

[Range]

c1 and c2 indicate character codes for the defined characters.

                      c1 = FEH
                      A1H ≤ c2 ≤ FEH
                      0 ≤ d ≤ 255
                      k = 72

[Description]

Define user-defined Chinese characters for the character codes specified by c1 and c2.

[Notes]

c1 and c2 indicate character codes for the defined characters. c1 specifies for the first byte, and
c2 for the second byte.
d indicates data. Set a corresponding bit to 1 to print a dot or to 0 to not print a dot.
You can define up to 10 characters.

[Default]

no user-defined characters
Between user-defined characters and data relationship shown below:

«
...
47
48
49
50
51
...
»

Summary of Contents for POS80B








































































Reviews:

No comments