H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l
V e r s i o n 2 . 1 4 . 1
Page 16
HBX APP FUNCTIONALITY
1. Demand Type
This setting is used to determine what the slab does when a demand is given to the control:
Force Melt:
When a demand is given the control will go into MELT Mode. When no demand is given,
the optical sensor will actively look for snow to trigger a melt demand.
Standby/Idle:
When a demand is given, the control will turn on and await snow detection by the
optical sensor or Force Melt demand by user. When no manual demand is present, control will be in
an OFF state.
Anticipate:
When a demand is give the control will turn ON for the amount of time (1-7 days) selected
in Aniticpate days (Advanced Settings) and await snow detection by optical sensor or Force Melt
Demand by the user.
2. Demand
This allows you to toggle the demand On/Off.
3. Melt Now/Off
This allows you to turn Melt Mode off.
4. Advanced Settings
Allows you to have access to all the settings on the SNO-0550 control including snow rate setup, Design
temperatures, Slab and System setup.
A contractor code is required for Advanced Settings. Contact HBX Technical Support for this code.
100%
9:41 AM
SNOW MELT
57°F
Boiler
Advanced
Advanced Settings
Demand Type
Demand
Melt Now
Target
°F
°F
°F
°F
°F
°F
Target
Slab
34
50
95
75
10
120
Supply
Return
Outdoor
System Pump
Mixing
Save
Back
Settings
System Status
Melt Now/Off
Demand
Demand Type