H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l
V e r s i o n 2 . 1 4 . 1
© HBX Control Systems Inc. 2020
Page 15
ADDING DEVICES
Adding Devices to the HBX ThermoLinx App
1. On the home screen, select “+ Device”.
2. Add the name of your SNO-0550. Leave this option blank if the SNO-0550 itself is already displaying a name.
3.
Enter sync code for SNO-0550 Control. The sync code can be found in the Wifi Setup Menu on the SNO-
0550.
The first half of the Sync-Code will always be letters, and the second half will always be numbers.
4.
Enter password for SNO-0550. The password can be found in the Wifi Setup Menu on the Control.
5.
Enter a system location name and select done/enter. (Ex. Home, Office, Cabin, etc.)
This is the name of the
system location, not the SNO-0550 you added
.
Symbols and numbers cannot be used in location name
6. After you have entered the system location name, select the location so it is highlighted, and select save.
100%
9:41 AM
Devices
Locations
83°
--
--
°F
No devices!
None
Room Temp
Target
100%
9:41 AM
Add Device
83°
Room Name
Select Location
Add Name Here
Leave Blank if device already named
Sync Code
SNOW-1234
AB12
Password
Add Location
Home
SETUP MENU
2.10
1) SNOW RATE SETUP
2) DESIGN TEMPS
3) SLAB SETUP
4) SYSTEM SETUP
5) TESTING
6) WIFI
SETUP WIFI
1) PASSWORD
2) SETUP WIFI
3) CONNECTION
AB12
READY
CHANGE PASSWORD
1) NO
2) YES
SETUP WIFI
1) PASSWORD
2) SETUP WIFI
3) CONNECTION
AB12
READY
SETUP WIFI
OPEN PHONE SETTINGS AND
CONNECT TO THERMOLINX002
NETWORK. ONCE CONNECTED
OPEN THE APP
SYNC-CODE SNOW-1234
SETUP WIFI
1) PASSWORD
2) SETUP WIFI
3) CONNECTION
AB12
READY
SYNC-CODE SNOW-1234
SYNC-CODE SNOW-1234