© 2020 HBX Controls
16
1. On the home screen, select “+ Device”.
2.
Enter the sync code for the WFS-0100 flow sensor. The sync code can be found on
the back of the sensor within the serial number.
3.
Enter password: 1111. This password is the default password for all sensors.
4.
Enter a system location name and select done/enter. (ex. Home, Office, Cabin,
ect.) This is the name of the system location, not the sensor you added.
Symbols and numbers cannot be used in location name
5.
After you have entered the system location name, select the location so it is
highlighted, and select save.
ADDING SENSORS TO THE THERMOLINX APP
100%
9:41 AM
Devices
Locations
83°
--
--
°F
No devices!
None
Room Temp
Target
100%
9:41 AM
Add Device
83°
Room Name
Select Location
Add Name Here
Leave Blank if device already named
Sync Code
ABTU-1234
1111
Password
Add Location
Building
