15
Wi-Fi Setup
ThermoLinx:
This is
only
for HBX Thermostats, snow
melt, boiler and geothermal controllers. Please
do not enter any information.
TLBTU:
This is for
only
SensorLinx Heat Sensors.
Please input the last four digits of your ThermoLinx
network.
Network SSID:
Enter the Wi-Fi network name that
the system will connect to. (Case Sensitive)
Password:
Enter the Wi-Fi network password.
Network name cannot contain more than 30
characters. The password should not contain any
special characters. If using WEP 64bit or 128bit
security must not be in Shared Mode. If using WEP
128bit, the password/key must be 26 characters
long
After entering all the required information please
select “Device Setup”. The control will now
establish connecting ThermoLinx to your Wi-Fi
network. Please allow for 120 seconds to connect
to your Wi-Fi Network.
LED Lights
Once connected check the red, green,
and blue LED lights on the WFS-0100. All
LED lights should be steady.
If you do not see the above description
on the control you are not connected to
a Wi-Fi network.
Solid Green Only:
incorrect password
S
olid Red and Green:
ThermoLinx is connected to your Wi-Fi but your network port
1314 is closed and not allowing communication to the HBX server, please contact
your internet provider to rectify this.
Connections can only be made to a 2.4GHz network.
CONNECTING TO A NETWORK (IOS)
100%
9:41 AM
WiFi Setup
--°F
Add Name Here
Connect to WiFi Now
Network SSID
Network Password
CHOOSE A NETWORK
Home Network
ThermoLinx
Home Network
1234
