Safety instructions
6
A03616_04_YI0_02
HBM: public
CLP
Conversions and modifications
The design or safety engineering of the transducer must not be modified with
out our express permission. Any modification shall exclude all liability on our
part for any damage resulting therefrom.
Qualified personnel
Qualified personnel are persons entrusted with the setup, mounting, startup
and operation of the product, who have the appropriate qualifications for their
function.
This includes people who meet at least one of the three following requirements:
1. Knowledge of the safety concepts of automation technology is a require
ment and as project personnel, you must be familiar with these concepts.
2. As automation plant operating personnel, you have been instructed how to
handle the machinery. You are familiar with the operation of the equipment
and technologies described in this documentation.
3. As commissioning engineers or service engineers, you have successfully
completed the training to repair the automation systems. You are also au
thorized to operate, ground and label circuits and equipment in accordance
with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the rele
vant application during use. The same applies to the use of accessories.
The force transducer must only be installed by qualified personnel, strictly in
accordance with the specifications and with the safety requirements and regu
lations.
Maintenance
The CLP force transducer is maintenance-free.
Accident prevention
The prevailing accident prevention regulations must be taken into account,
even though the nominal (rated) force values in the destructive range are well
in excess of the full scale value.