15
MGCplus−ML71BS6
A0851-3.1 en
HBM
Measurement data messages CAN port 1:
Absolute values in Float (identifier: default values)
Identifier
8−byte data field
0x200−0x23F 4−byte measured value 1 (absolute
Float)
4−byte measured value 2 (absolute
Float
In digits from 7680000 (= 24−bit) as Long
Identifier
8−byte data field
0x240−0x27F
4−byte measured value 1 (signed
integers in digits from 7680000)
4−byte measured value 1 (signed
integers in digits from 7680000)
In digits from 30000 (= 16−bit) as Word
Identifier
8−byte data field
0x280−0x29F
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
Measurement data messages CAN port 2:
Absolute values in Float
Identifier
8−byte data field
0x300−0x33F 4−byte measured value 1 (absolute
Float)
4−byte measured value 2 (absolute
Float)
In digits from 7680000 (= 24−bit) as Long
Identifier
8−byte data field
0x340−0x37F
4−byte measured value 1 (signed
integers in digits from 7680000)
4−byte measured value 1 (signed
integers in digits from 7680000)
In digits from 30000 (= 16−bit) as Word
Identifier
8−byte data field
0x380−0x39F
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
2−byte measured
value 1 (signed in-
tegers in digits
from 30000)
Adjusting the ranges
As a variant to the default setting, you can choose the start of the ID range
you are using for the selected format at the particular CAN bus.
