5.2.2
DC Calibration
Figure 5.5:
Test performing
A
As the system performs the test “DC Calibration”, you will see a blue
background behind the “DC Calibration”
B
When the test is passed, the background behind “DC Calibration” will turn
to green.
C
When the test is failed, the background behind “DC Calibration” will turn to
red.
Note
If you performed a receiver test you will only see the available DC test for that
selection.
Figure 5.6:
Receiver
-
Test Performing
ISOBE5600
72
I2716-4.0 en
