Sensor Installation
FS64
A4263-3.5
HBM: public
11
2.1.2
Needed Tools
List of Equipment
Drilling Machine
Interrogator (or equivalent)
List of Material
Parallel Tilt
Sensor
Orthogonal Tilt
Sensor
Biaxial Tilt
Sensor
Hammer
1
1
1
Spanner wrench
10 mm
10 mm
13 mm
10 mm
13 mm
Umbrako wrench
-
Number 3
Number 5
Number 3
Number 5
Slotted screwdriver
L30; D2.8 E0.7
(mm)
L100; D2.8 E0.7
(mm)
L100; D2.8 E0.7
(mm)
D7.0 E1.1 (mm)
D7.0 E1.1 (mm)
D7.0 E1.1 (mm)
Mechanical anchor
Hilti: HSA-R M6
5/-/-(suggested)
Hilti: HSA-R M8
5/-/-(suggested)
Hilti: HSA-R M8
5/-/-(suggested)
Drill bit diameter
6 mm
8 mm
8 mm
1)
Parallel Tilt Sensor – only one sensor installed on the existing surface
2)
Orthogonal Tilt Sensor – only one sensor installed orthogonally on the existing surface with the
biaxial mounting plate
3)
Biaxial Tilt Sensor – two sensors installed on two directions with the biaxial mounting plate
