HBK FIT-AED-Kit, Operating Manual

Page: 10 / 48

FIT
®
-AED-Kit
DEVICE DEFAULT SETTINGS
8
5 DEVICE DEFAULT SETTINGS
The settings described below are defaults that you will need for initial commissioning.
5.1 AED9401A or AED9501A
Settings in the AED9401A basic device (see
Fig. 6.1 on page 11):
u
Select bus
CANopen or DeviceNet: Switch S2
u
Bus terminator to
on: Switch S1
u
Bus isolator to
off: Switch S3
Settings in the AED9501A basic device (see
Fig. 6.2 on page 13):
u
Select bus
CANopen or DeviceNet: Switch S2
u
Bus terminator to
on: Switch S1
5.2 AD103C in AED
Settings in the AD103C (factory settings):
S
CAN bus address: 63; DeviceNet address: 63
S
CAN baud rate: 125000
S
Diagnostics bus address: 31
S
Diagnostics bus baud rate: 38400
5.3 FIT
Settings in the FIT (factory settings):
S
CAN bus address: 63; DeviceNet address: 63
S
CAN baud rate: 125000
S
Diagnostics bus address: 31
S
Diagnostics bus baud rate: 38400