Solutions for Fluid Technology
HBE GmbH
Hönnestraße 47 | 58809 Neuenrade | Germany
Phone +49 (0) 23 94 / 616-0
Fax +49 (0) 23 94 / 616-25
[email protected]
www.hbe-hydraulics.com
3.4 USAGE
The following items must be paid attention to before
mounting, operation or service of the coupling.
•
The operating and mounting instructions are to be read
imperatively.
•
Operations must only be made by qualified personnel.
The coupling must only be applied in accordance to its
corresponding technical data. Constructional changes of
the coupling parts without any permission by the manufac-
turer are illegal and result in loss of warrenty.
4. STORAGE
Due to the corrosion protection which must not be da-
maged, the coupling can be stored for approx. 6 – 12
months at a dry place.
The gear rings (Polyurethane) keep their qualities in case
of a corresponding storage for approx. 5 years.
ATTENTION!
It must be ensured that there is no condensation in
the storage rooms. A relative humidity of less than
65 % is favourable.
Furhtermore, please ensure that there are no ozone
generating devices, such as illuminants or high
voltage devices in the storage rooms.
5. MOUNTING
5.1 MOUNTING OF COUPLING
Basically, the coupling is supplied in component parts.
Before mounting, the coupling must be checked for com-
pleteness.
Distinguishing features of the gear rings (Item 2)
ITEM
PIECES
DENOMINATION
11
2
Hub
2
1
Gear Ring
3
2
Set screw or
Cheese head screw
SHORE HARDNESS
(SHORE)
MARKING
(COLOUR)
80 SH A
blue
92 Sh A
white
95/98 Sh A
red
64 Sh D
green
Gewindestift oder
Zahnkranz
1
A- Nabe
3
2
B-Nabe
3
1
bei Klemmnabe Zylinderschraube
A-Hub
B-Hub
Gear Ring
Set Screw or
Cheese head screw in case of Clamping Hub
