20
^
hazet.com
•
]
2
For your safety
Electric energy may cause serious injuries!
Always wear personal protective equipment!
2. Intended use
Operational reliability is only guaranteed if the
tool is used as intended in accordance with
the information in the operating instructions.
In addition to the safety advice in these ope
rating instructions, the general safety regulati
ons, regulations for the prevention of
accidents and regulations for environmental
protection valid for this tool's application
range must be observed and respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
• The HAZET cordless electric drill is used
for handiwork and DIY jobs when drilling,
countersinking, milling and screwing. The
quick-clamping drill chuck enables easy
replacement of the tools that have been
used.
• The HAZET cordless electric drill has over
15+1 torque positions to choose from,
which can be adjusted on the front hou-
sing.
• The device must only be used if it is in
good working condition.
• All safety equipment must always be within
reach and should be checked regularly.
• Any incorrect use of the cordless electric
drill or use that fails to comply with the
safety instructions can result in serious
injury or even death.
• Any other kind of use and/or use that goes
beyond the intended use of the tool is pro-
hibited and is
deemed to be improper.
• Any claims against the manufacturer
and/or its authorised agents because of
damage caused by improper use of the
tool are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
1. Owner's
liability
• The tool was developed and manufactured
according to the technical norms and stan-
dards valid and recognised at the time and
is considered to be operationally reliable.
Nevertheless, the tool may present a dan-
ger when it is not used as intended or in
an inappropriate way by non-qualified per-
sonnel. Please make sure that any person
using this tool or carrying out maintenance
work carefully reads and fully understands
these operating instructions before using
the tool.
• Any modification of the tool is strictly for-
bidden.
• All safety, warning and operating instruc-
tions on the tool must be kept legible at all
times. All damaged labels or stickers must
be replaced immediately.
• All specified set values or ranges must
be observed.
• Always keep the operating instructions
close to the tool.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regular-
ly.
