21
HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29
•
42857 Remscheid
•
GERMANY
[
+49 (0) 21 91 / 7 92-0
•
\
+49 (0) 21 91 / 7 92-375
•
^
hazet.de
•
]
2
For your safety
Electric energy may cause serious injuries!
Always wear personal protective equipment!
3. Dangers that may arise
from using the tool
Before each use, check the HAZET cordless
electric drill for full functionality. Do not use the
drilling machine if its functionality cannot be
ensured or if damage is detected. If the drilling
machine is used its full functionality not being
guaranteed, there is a risk of serious injury,
health problems and material damage.
Electric energy may cause serious injuries to
persons. The following safety instructions must
be observed and adhered to in order to avoid
electric shock, injuries or fire:
• Ensure cable and housing are not dama-
ged. Tools/chargers that have been drop-
ped or damaged must be checked by quali-
fied personnel before restarting operation.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched
on or off with the On/Off switch are dan-
gerous and must be repaired immediately.
• When laying the power supply lead, ensure
it does not come into contact with hot or
sharp parts and that it cannot be damaged
in another way. The lead is to be laid in
such a way that it does not constitute a trip
hazard.
• The charger and drilling machine must
not be exposed to water or other liquids.
Dangerous voltage discharge may occur.
• Keep unused rechargeable battery
away from metallic objects such as paper
clips, coins, keys, nails, screws, etc. These
objects can establish a connection between
the poles and cause a short-circuit, which
can cause sparks, flames or fires.
• The charger and/or the drilling machine
must not be disassembled. Inappropriate
assembly can lead to a reduction of the
functionality, to fire, to electric shocks and/
or to injury.
• All service or repair work must be carried
out by qualified personnel only. Only
use original spare parts so as to guarantee
its long-term operational safety.
• Do not remove safety devices and/or hou-
sing parts.
• Never operate the tool when a protective
cover is missing or when not all of the
safety devices are fitted and in perfect
condition.
• If an extension cord is necessary, it must
be sufficiently dimensioned for the charger.
Cables which are not appropriate for the
necessary amperage may overheat.
• The battery may only be recharged
with the explicitly intended charger. A char-
ger that is designed for a different type of
rechargeable battery can cause a fire in this
type of rechargeable battery.
• Only use the tool with the specified
battery. Use of any other
battery may cause a fire.
• The rechargeable battery and the charger
heat up slightly during charging. This
does not reduce their functionality. When
working with the work light, appropriate
caution is required.
• Only use the cordless electric drill at
places that are governed and regulated by
applicable provisions for work areas and
electrical systems.
• For safety reasons, any modification to
HAZET cordless electric drills is strictly for-
bidden. Any modification of the tool
will result in immediate exclusion from war-
ranty and liability.
