20
Always wear personal protective clothing and safety equipment!
3
Design and Function
replacing of the carbon brushes –
see ill.
• Remove brush cap.
• Hook-off carbon brush’s excess with a
screwdriver for slotted screws.
• Remove carbon brush.
• When inserting the carbon brush, take care that
the carbon brush’s alignment fits into the contact
hole outside the brush tube.
Attention:
Introduce the carbon brush’s clips with
the contact pieces on the right and left
outside the brush tube. Please be very care
ful, as an incorrect assembly may deform the
carbon brush or its contacts which could
provoke motor damage.
9. Cleaning
Clean the HAZET cordless impact wrench regu-
larly with an ordinary detergent free of solvents and
abrasive agents.
Check for dust
• You can remove dust with a soft cloth or with a
cloth dipped into soap water.
• Do not use bleaching agents, chloric detergents,
benzine or thinner as they might damage the
plastic material.
• For cleaning the plastic parts, use a cloth dipped
in soap water and wipe off after cleaning.
10. EC Declaration of Conformity
We, HAZET-WERK, declare that the identified
product 9212 N-1 and its accessories are in
compliance with the EC Directive concerning
machines (2006/42/EC), the EMC Directive
(2004/108/EC) and the Low Voltage Directive
(2006/95/EC).
See also attached EC Declaration of Conformity
223 309
II
.06.2013/
∞
be/Lief