Hazet 9033 N-4, Operating Instructions Manual

Page: 14 / 24

14 ^
hazet.com •
]
info@hazet.de
3. Dangers that may arise
from using the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its functio-
nal efficiency cannot be ensured or if damage
is detected. If you use the tool despite full
functionality not being guaranteed, this poses
a risk of serious injury, health problems and
material damage.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or hou-
sing parts.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
• Keep pneumatic tools out of the hands
of children. Unattended tools or tools that
are connected to the compressed air supply
may be used by unauthorised persons and
could cause injury to them or to other per-
sons.
2
For your safety
WEAR WORKING GLOVES AND
SAFETY GLASSES.
Pneumatic tools can disperse chips,
dust and other abraded particles at high
speed which may result in severe eye
injuries. Compressed air is dangerous.
The air flow may cause harm to sensiti­
ve parts of the body like eyes, ears, etc.
Dust and objects being raised by the air
flow may cause injuries.
WEAR HEARING PROTECTION.
Long exposure to the working noise of
pneumatic tools may result in perma­
nent hearing loss.
WEAR A FACE MASK OR
BREATHING PROTECTION.
Breathing in the vapour of some
materials like adhesives and chemicals
containing tar can, over a prolonged
period, cause serious harm.
WEAR TIGHT-FITTING PRO-
TECTIVE CLOTHING.
Tools with moving parts can get caught
in your hair, clothes, jewellery or other
loose objects, which can lead to serious
injury. Never wear clothing that is too
loose and/or clothing with bands or
loops, etc. which may get caught in
the moving parts of the tool. During the
work, take off jewellery, watches, iden­
tification tags, bracelets, necklaces etc.
that could get caught in the tool. Never
touch the moving parts of a tool. Long
hair should be tied back or covered.
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!