28
Do not put your hands inside the side housing
g
opening when removing wheel bearing!
Grease the threaded spindle 4930-1
a
before each use!
1.1 Select the thrust washer
f
according to the outer wheel bearing diameter.
Select the centring bushing
e
according to the inner wheel bearing diameter.
Both parts must be joined to the spindle nut
b
in such a manner that the collar of the
thrust washer f
is facing the flange of the centring bushing e.
1. Dismantle the wheel hub using the HAZET wheel hub / cardan shaft extractor set 4935-
2/15 together with e.g. the sliding hammer HAZET 1969-16/2.
1.2
If the design of the bearing seat is such that dismantling can only be carried out in
one direction, the thrust washer
f
must be replaced by a spacer plate 4930-5
c
.
Ensure that the round edge of the spacer plate
c
is facing the flange of the centering
bushing
e
.
1. Wheel Bearing Removal
c
.Design.and.Function
