20
During operation do not reach into extractor device!
Lubricate the threaded spindle 4930-1 before each use!
3
Design and Function
3. Application
Dismounting the wheel hub bearing
• Insert the (4) 5 thrust pins
F
into the receiving holes of the thrust plate
E
.
• Put the 2 thrust ring halves
B
laterally between the rear side of the wheel hub flange and the bear-
ing housing (axle body) and tighten firmly with the 2 cylinder head screws M8X35.
• Put the thrust washer
D
onto the spindle nut 4930-2.
• Put the threaded spindle 4930-1 through the thrust plate
E
.
• Put the threaded spindle 4930-1 with the thrust plate
E
and the (4) 5 inserted thrust pins
F
from
outside on the wheel hub bearing that the thrust pins
F
protrude the receiving holes of the wheel
hub and are supported at the front side of the thrust ring
B
. At the same time insert the thrust
washer
D
with the spindle nut 4930-2 into the interior of the bearing housing and screw the
threaded spindle 4930-1 into the spindle nut 4930-2.
• Once the force closure has been reached, the spindle nut 4930-2 has to be retained with an
assembly tool for nuts and screws (e.g. box wrench).
• After dismounting the wheel hub bearing, dismount the mounted parts!
Cylinder head
screw
M8 x 35
D
B
F
E
4930-1
Bearing housing / Axle body
1
2
4930-2
Summary of Contents for HAZET 4934-2562/6
Page 27: ... 27 Notizen Notes ...
