USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
4
Mounting
As shown above, an access hole is needed to run the cables that will power and communicate with
the PoolScout. An existing outdoor opening may be considered if you can route the cables through
from indoors. If not, a hole will need to be drilled. Use a ½” drill bit and make sure that there are no
in-wall pipes or electrical wires in the drill path. Before drilling, fit the Electrical Box over the previ-
ously marked spot. Make sure that it can be centered over the hole and properly fastened to the
surface. Also, plan the orientation of the exit fitting and the mounting location of the Alarm Module
before drilling.
Camera
Alarm
Module
Power
Adapter
Power
Cable
Ethernet
Cable
Electrical
Box
Wall
Receptacle
Ideal
Height
Router
10’
7’
Access
Hole
