USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
5
Add a Schedule
If the “Set Schedule” button is touched, you’ll be brought to the pump schedule screen below. Here you can add, delete, edit, enable and disable schedules.
Because there have been no schedules set up, the screen is blank. Touch the Add button (+) to add a schedule for the pool pump.
Set Schedule Time
Refer to the screen below to set the start and stop times. When finished, touch “repeat”.
ON
POOL
vsp pump
ON
MED
HIGH
CUSTOM
LOW
Turn On / Turn Off
- Slide this switch
manually to turn on/off the pump. This
will override schedules or timer settings.
Status of Equipment
- This is an indicator
only. When lit up and in motion (shown below),
the equipment is active. When grayed out and
stationary, equipment is off.
Set Schedule
- Touch this
button to add/delete a schedule
for the filter pump or to enable/
disable an existing schedule.
Countdown Timer
- Touch this
button to set a countdown timer
for the filter pump.
Change Speed
- Manually select the desired
speed. This will not be shown for single
speed pumps. Low, Med, and High are fixed
speeds. The Custom button will bring you to
a screen that allows you to select a speed
based on percentage or RPM (determined
during configuration).
Set Start Time
- Select this button to edit
the start time. The pump will start at the
time shown.
Set End Time
- Select this button to edit the end
time. The pump cycle will end at the time shown.
POOL
vsp pump
Please press + button to add schedule items.
ON/OFF
Set Schedule Frequency
- Select
how often you’d like the schedule to
run (weekdays, weekends, all week or
custom).
Set Pump Speed
- Select this button
to change the pump speed for the
schedule.
Edit Time
- Use these buttons to change
desired time.
Select Field
- Touch Hours, Minutes or
AM/PM to edit.
end 7:00 pm
POOL
vsp pump
start 10:00 am
10
start / end
repeat
speed
am
pm
00
:
end 7:00 pm
POOL
vsp pump
start 10:00 am
10
start / end
repeat
speed
am
pm
00
:
