6. Pump Not Turning On
Verify correct model # is
displayed. AL-6 for HP units, AL-7
for RJ units. Press the diagnostic
button 6 times from the default
screen to display the model #.
If not correct, replace PCB. Otherwise, proceed to
Step 6B.
Step 7A
If no continuity exists, replace time clock.
Otherwise, proceed to Step 6C.
Page 21
Step 7B
With the power switch in the center
position and the trippers in “on
position”(out), check for continuity
between the brown wires at J1 on the
PCB.