15
The check system > ‘Inspect Cell’ message indicates that the system is recommending
the TurboCell should be inspected and cleaned (if necessary). This message will appear
every 500 operational hours as a reminder to inspect and/or clean the TurboCell.
After the solution has been safely removed, thoroughly
rinse the TurboCell before returning it to its place in the
plumbing. Once returned turn the pump back ON and
proceed to the step 6.
IF the ‘Inspect Cell’ alarm appears, then press the
‘Menu’ button until ‘Default Menu’ screen appears,
navigate using the (>) until ‘Inspect Cell press + to reset’
appears, then promptly press the (+) key.
Thoroughly Rinse Cell & Return
Step 5
Step 6
NOTE: If the cell was reading a low salt level prior to cleaning, the average salt may need to be
reset. To reset the average salt level, follow the steps outlined on
pg.8
or wait 24 hours for the
system to acclimate to the recent changes. For detailed instructions on resetting the ‘Inspect Cell’
message, refer to
pg. 12
.
Reset: ‘Inspect Cell’ message
How To: Clean the TurboCell (cont.)
1
2
3
Summary of Contents for AquaLogic
Page 6: ...ProLogic How To ...
Page 16: ...ProLogic Troubleshooting ...
