USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
7
Controller Interface:
To protect the pool, the AquaRite Pro and the Pro Logic controller will automatically shut down and display a
“Check System” message if the AQL-CHEM4-CHLOR dispensing device runs continuously for more than the
selected timeout value. This prevents a situation where the AquaRite Pro or the Pro Logic controller is constantly
feeding Liquid Chlorine because of a probe error or external problem with the pool. This allows the pool or spa
owner to evaluate the pool chemistry before continuing with pH control.
Winterization -
1.
Remove pump pick up tube from tank.
2.
Insert pick up tube into 5 gallon bucket of water.
3.
Run the pump to flush water and liquid Chlorine out of the feed lines and into the pool.
4.
Use the 5 gallon bucket of water and allow the pump to feed until the bucket is empty. Continue to run
the pump for a period of 10-15 minutes after the bucket is empty. This will run the lines dry by forcing air
through them.
5.
Backwash the pickup tube and filter. (This cleans the filter)
6.
Drain and reinstall pick up tube or secure to side of tank.
Liquid Chlorine can be stored outside or inside a secure and ventilated area/location for the winter.
Typical Pool Liquid Chlorine at 12% concentration has a freezing point of 27° F or 15° C.
Typical Pool Liquid Chlorine at 12% concentration has a boiling point of 214° F or 101° C.
If disposal of Liquid Chlorine is required from the tank please contact your local environmental protection agency
for instructions.
HAYWARD
®
Pool Products Limited Warranty
To original purchasers of this equipment, Hayward Pool Products, Inc. warrants its liquid chemical feed systems (excluding the Santoprene Feed Tube)
to be free from defects in materials and workmanship for a period of ONE (1) year from the date of purchase, when used in single family residential
applications.
The limited warranty excludes damage from freezing, negligence, improper installation, improper use or care or any Acts of God. Parts that fail or
become defective during the warranty period shall be repaired or replaced, at our option, within 90 days of the receipt of defective product, barring
unforeseen delays, without charge.
Proof of purchase is required for warranty service. In the event proof of purchase is not available, the manufacturing date of the product will be the
sole determination of the purchase date.
To obtain warranty service, please contact the place of purchase or the nearest Hayward Authorized Service Center. For assistance on your nearest
Hayward Authorized Service Center please visit us at
www.hayward.com
.
Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements
or repair.
The Hayward Pool products warranty does not apply to components manufactured by others. For such products, the warranty established by the
respective manufacturer will apply.
The express limited warranty above constitutes the entire warranty of Hayward Pool Products with respect to its’ pool products and is in lieu of all other
warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. In no event shall Hayward Pool products be
responsible for any consequential, special or incidental damages of any nature.
Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Hayward Pool Products
620 Division Street
*Supersedes all previous publications.
Elizabeth, NJ 07207
