HAYMAN REESE
PART No:
03229RW
TOYOTA CAMRY ASV70R CL4
INSTALLATION INSTRUCTIONS
PLEASE ENSURE THAT INSTRUCTIONS ARE UNDERSTOOD PRIOR TO FITMENT
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Rev: A
Page 9
Issue Date:
09-08-2018
Hayman Reese (Cequent)
PO Box 4050, Dandenong South VIC 3164
Phone 1800 812 017 Email [email protected]
16. Re-install exhausts, bumper and fasteners
following steps 1-8 in reverse. Mount rear
most exhaust rubber mount to hanger rod
attached to towbar side-arm.
Place the instructions in the glove box after
fitment.
For Hybrid models only, refer to Steps 17
& 18. For petrol models go to Step 21.
17. Under the RHS of the rear seat, remove the
fastener (1) on the hybrid access panel (2).
18. Remove the hybrid access panel and then
remove the orange isolator switch.
19. Remove the RHS luggage compartment trim
panel (1).
20. Disconnect the negative battery terminal (2).